Brushed Polyester (Silver or Gold)

Metallized Polyester - Permanent Adhesive Download Bulletin
Summary: A 2.0 mil print-treated brushed metallized polyester film coated with a permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to production.
Applications:Designed to simulate a metallic appearance. Permanent decorative decals, product identification markings, point of purchase decals, and consumer information labels.
Film Thickness:2.0 mils
(Thickness variance +/- 10%)
Adhesive Thickness Side One:0.8 to 1.2 mils.
(Thickness variance +/- 10%)
Liner Thickness Side One:6.7 mils.
(Thickness variance +/- 10%)
Temperature Ranges:Minimum application temperature is +50ºF.
Service temperature is -40ºF to +250ºF.
Dimensional Stability:Excellent.
Expected Exterior Exposure:Silver: Up to 2 years under normal conditions.
Gold: Up to 6 months maximum.
Adhesion:To stainless steel - 48 oz./in.
To painted metal - 48 oz./in.
PSTC-101 with 24-hour dwell at 70ºF and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Water Resistance:Excellent.
Humidity Resistance:Excellent.
Solvent Resistance:Good.
Storage Stability:2-year shelf life when stored at 70°F and 50% relative humidity.
Product Codes:SILVER: BG2-STC-P/90#
GOLD: BS2-STC-P/90#