Ultra Track - Printable Silver Polyester - Permanent Adhesive Download Bulletin
Summary: A 2.0 mil silver metallized print-treated polyester film coated with 200-4998 high-tack permanent acrylic pressure sensitive adhesive on a 90# Layflat liner. This polyester film is designed to accept a variety of UV curable and solventbased screen inks. May also be used with flexographic, offset, and letterpress inks but must be tested prior to use. The 90# Layflat liner offers good dimensional stability over a range of environmental conditions resulting in excellent sheet printing.
Applications:This product is designed for permanent decals and nameplates requiring adhesion to a variety of substrates ranging from clean metal, painted metal, glass, styrene and low surface energy plastics such as polypropylene and polyethylene. May also be applicable to certain powder coated metal finishes. Must be tested prior to use.
Film Thickness:2.0 mils.
(Thickness variation +/- 10%)
Adhesive Thickness Side One:0.8 to 1.1 mils.
(Thickness variation +/- 10%)
Liner Thickness Side One:6.7 mils.
(Thickness variation +/- 10%)
Temperature Ranges:Minimum application temperature is +40°F.
Service temperature is -40°F to +250°F.
Dimensional Stability:Excellen.
Expected Exterior Exposure:Up to 2 years.
Adhesion:To Stainless Steel 72 oz./in.
Glass 72 oz. /in.
Polypropylene 40 oz. /in.
Polyethylene 40 oz. /in.

PSTC-1 with 24-hour dwell at 70°F and 50% relative humidity. Typical values Individual values may vary. Test thoroughly before production.

Water Resistance:Excellent.
Humidity Resistance:Excellent.
Storage Stability:1-year shelf life when stored at 70°F and 50% relative humidity.
Product Codes:S2-STC-HTP/90#