Printable Clear Polyester - Permanent Adhesive Download Bulletin
Summary: A 2.0 mil clear polyester film with 200-4986 permanent acrylic pressure sensitive adhesive on a 90# Layflat liner. These films are designed to accept a variety of UV curable and solvent based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to use.
Applications:Designed for general purpose printing of nameplates, decals, product identification markings and labels on metal, glass, painted metal and some plastics. Recommended for smooth flat substrates. Test thoroughly if substrate has texture or curvature.
Film Thickness:1.0, 1.5, 2.0, 4.0, 5.0 or 7.0 mils.
(Thickness variation +/- 10%)
Adhesive Thickness Side One:0.8 to 1.0 mil.
(Thickness variation +/- 10%)
Liner Thickness Side One:6.7 mils.
(Thickness variation +/- 10%)
Temperature Ranges:Minimum application temperature is +50°F.
Service temperature is -40°F to +250°F.
Dimensional Stability:Good.
Expected Exterior Exposure:Up to 2 years.
Adhesion:To stainless steel - 40 oz/in. To painted metal - 40 oz/in. When tested according to PSTC-1 with 24 hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Water Resistance:Limited immersion resistance. Test for specific application.
Humidity Resistance:Good. Under high humidity conditions product may fog. This condition will usually clear within 48
Storage Stability:2 year shelf life when stored at 70°F and 50% relative humidity.
Product Codes:C2-STC-AP/90# (2.0 mil)